HomeShelbyville's older platted additions
Shelbyville Neighborhood

Window Treatment for Shelbyville's older platted additions

Custom Shelbyville window treatment crews serving Shelbyville's older platted additions homeowners with free in-home measure, repair, replacement.

Call (317) 999-5154Get Free Assessment
Quick Answer

For this part of Shelbyville, the recurring issues are afternoon glare on the west-facing side and privacy on anything close to the street. The answers below deal with both.

  • Services: faux wood blinds, wood blinds, vertical blinds, aluminum mini blinds
  • Service area: Shelbyville's older platted additions, Shelbyville, IN and surrounding areas
  • A restring, a new cord lock, a tilt mechanism or a dead motor battery gets handled far faster than a new order, because nothing has to be built. New custom work runs on the factory's two to five week clock.
  • Insured and bonded
  • Serving Shelbyville, IN since 2008
About Shelbyville's older platted additions

Local Window Treatment Experience in Shelbyville's older platted additions

If your address is in Crestmoor, Rolling Ridge, Wellington Heights or Candleglo Village, you own the version of Shelbyville the four new communities do not compete with. Around $200,000 buys a three bedroom ranch here at roughly $145 per square foot, implying something near 1,380 sq ft, while Bear Run, Isabelle Farms, Summerfield and Twelve Oaks all start between $231,990 and $241,400. Twelve to eighteen openings is the usual count for a ranch that size. What you do not get is a builder warranty, a single plan set, or any assumption that the window in the front room matches the one in the back bedroom.</p><p style="font-size:16px;color:#4a5a6a;line-height:1.75;margin:16px 0 0">The single most important thing about these plats is what happened to the windows after they were built. Shelbyville's median year built is 1972 and 35.4 percent of the city's housing went up between 1940 and 1979, and houses of that age very often carry vinyl inserts retrofitted into their original frames. An insert takes depth at the opening and leaves a stop that can be too shallow for a standard headrail, and it does not do it consistently: two openings in the same Hildebrand Village house can measure differently at the head. That is the job here. Measure everything and assume nothing from the address on the mailbox.

We have served Shelbyville's older platted additions homeowners through the full range of window treatment needs, from inspections and repairs to full replacements. Whatever the system, our Shelbyville crew approaches every project with clear communication and respect for your property.

The Housing Here

Ranch stock, porch fronts and 1990s production: what these Shelbyville plats hold

Beech Brook, Brent Woods, Candleglo Village, Crestmoor, Hildebrand Village, Knighthood Grove, Knighthood Village, Lantana Estate, Riley Village, Rolling Ridge, Wellington Heights, Countryside and Hazelwood are separate plats of different dates spanning roughly the 1950s through the 1990s. Nothing beyond the names could be verified. No Shelby County parcel service carrying subdivision names is publicly reachable, and Indiana's statewide parcel service carries no subdivision name or year built, so no home count, lot size or build date exists for any of them in a form anyone can retrieve. That is a fact about what the county publishes, not a gap in the neighborhoods themselves.

What is documented is the housing character of the city these plats sit inside: ranch, Arts and Crafts, bungalow and custom brick, predominantly single story in the mid century sections. The mid century plats bring large fixed picture windows and wide horizontal sliding units. The bungalow and Arts and Crafts houses bring porch front assemblies and multi light upper units on deep wood casings. Arched and transom units show up only in the 1990s plats and nowhere earlier, and a two story great room wall is unlikely anywhere in this group. At about $145 per square foot against a typical $200,000 sale, the implied house runs near 1,380 sq ft with twelve to eighteen openings.

Built
Mixed, roughly the 1950s to the 1990s. Not individually sourced per plat
Homes
Not sourced. No Shelby County parcel service carrying subdivision names was reachable
Typical size
Not published. At about $145 per square foot and a typical $200,000 three bedroom ranch, the implied size is near 1,380 sq ft
Styles
Ranch, Arts and Crafts, bungalow and custom brick, predominantly single story in the mid century plats
What It Means For Your Windows

Measuring in Crestmoor, Rolling Ridge and the rest: inserts, picture windows, settled openings

Assume out of square and take a three point measure: width at the head, the center and the sill, height at both sides and once down the middle. In plats built between the 1950s and the 1990s that is not caution, it is arithmetic, because 30 to 70 years of settlement moves an opening further than most people expect. We order to the narrowest width we find, and the factory then removes 1/16 inch from each side of that number. On an opening a quarter inch out of square, the difference between measuring once and measuring three times is a shade that binds at one end of its travel and a shade that does not.

Then there is depth. A retrofit insert set into the original frame takes usable inside mount depth away at the opening, and it takes a different amount in different rooms of the same house, because the work was often done in stages over years. So we read the stop at the head of every opening rather than one. Where there is not enough left for a headrail, these houses give you something the new communities do not: flat wood trim wide enough to carry an outside mount without looking bolted on. On a bungalow or an Arts and Crafts house in Riley Village or Beech Brook, an outside mount on the casing is usually the better looking answer regardless.

Inserts do not take the same depth twice

With Shelbyville's median year built at 1972 and 35.4 percent of the city built between 1940 and 1979, most windows in these plats are inserts fitted into original frames. Depth at the stop varies room to room in one house because the work happened in stages. We read every opening at the head. A single measurement taken in the living room and applied to the whole house is how a shade ends up not fitting.

One picture window, sometimes two shades

The mid century plats in Crestmoor, Rolling Ridge and Beech Brook put wide fixed picture windows in living rooms, and a single shade across one gets heavy: the weight lands on one clutch and one pair of brackets. Past a certain width we split it into two shades on a shared headrail with a center support bracket, which handles the load and keeps the lift manageable. The trade is a visible line where the panels meet, and we show you where that falls before ordering.

Arched and transom units belong to the 1990s plats only

Arched and transom units in this group appear only in the 1990s sections, never in the mid century ranch stock in Crestmoor or Hazelwood. An arch takes a fixed arched panel above a working lower panel, because no movable product follows a curve and keeps operating. Leaving the arch bare and treating only the rectangle below it is a legitimate choice, and it is cheaper. Decide that before the quote, not after.

Horizontal sliding units stack sideways

Wide horizontal sliding units and sliding doors are common across these 1950s to 1990s plats, and the sensible answer stacks to the side rather than at the head. Vertical vanes or a panel track clear the opening to one end. The stack then sits over that part of the glass permanently, so which end it goes to is a decision made at the order, and it cannot be swapped later without a new headrail.

What We Specify Here

What we usually fit in Shelbyville's older plats

Budget is part of the specification here, not an afterthought. A typical three bedroom ranch in Crestmoor or Wellington Heights sells around $200,000, and a whole house order at national custom pricing of $250 to $2,600 per window across twelve to eighteen openings is a real number to look at. So we sequence: the front rooms that face the street first, bedrooms next, the rest whenever you are ready. The catch with sequencing is dye lot. Fabric run six months apart can differ visibly under the same color name, so any two rooms that have to match get ordered together even if the rest of the house waits a year.

1-inch aluminum blinds where the insert left no depth

The product that still mounts inside an opening a retrofit insert has left shallow. A 1-inch aluminum blind needs very little depth at the head, closes tight, and costs a fraction of a custom shade across twelve to eighteen openings. It also reads correctly in a 1950s or 1960s Crestmoor or Hazelwood ranch where a wide faux wood slat looks wrong. Slats dent if they are handled roughly, so it is not the pick for a child's room.

Vertical blinds or a panel track over the horizontal sliding units

Mid century Shelbyville plats put wide horizontal sliding units and sliding doors in living rooms, and a product that stacks sideways beats one that stacks at the head. Vertical vanes clear the opening to one end; a panel track does the same with fewer, wider panels and a cleaner look. Choose the stacking side at the order, because the stack sits over that part of the glass permanently and cannot be moved afterward.

Flat fold Roman shades on the bungalow and Arts and Crafts fronts

The porch front houses in Riley Village and plats like it carry deep wood casings and multi light upper units, and a flat fold Roman mounted outside on the casing reads against that trim where a modern roller does not. Fabric weight matters. A lined Roman across a wide opening gets heavy, and its stack at the head is deeper than people expect, so we measure the stack before choosing between an inside and an outside mount.

Composite shutters for the 1990s plats' arched and transom units

Arched and transom units belong to the newest plats in this group. An arch takes a fixed arched panel above a working lower panel, priced separately from the rectangle beneath. National shutter pricing is $175 to $800 per window. A Z-frame or a deco frame covers the uneven returns you find where an insert changed the depth, which is common enough in these houses that we check it at every opening before quoting a frame type.

Getting Around

Where these plats sit, and the names that are not in them

These plats are spread around Shelbyville 46176 outside the historic core and away from the four new build communities on the edges. Kennedy Park, ten acres with a playground and basketball courts, and the Skyline Drive-In theater are the landmarks nearby. Street names for the individual plats are not published anywhere reachable, so no list appears here. One caution worth repeating: the same listing taxonomy that returns Beech Brook and Rolling Ridge also returns Marietta, Smithland, Prescott, Rays Crossing, Fenns, Walkerville and Marion, which are rural Shelby County hamlets and townships rather than Shelbyville subdivisions. Schools are Coulston Elementary or Thomas A. Hendricks Elementary depending on the boundary, then Shelbyville Middle School and Shelbyville High School.

Around the neighborhood
Kennedy Park (10 acres, playground and basketball courts)Skyline Drive-In theater
Shelbyville Central Schools
Coulston Elementary or Thomas A. Hendricks Elementary depending on attendance boundaryShelbyville Middle SchoolShelbyville High School
Services

Window Treatment Services in Shelbyville's older platted additions

Every service Shelbyville Window Treatments offers across Shelbyville is available to Shelbyville's older platted additions homeowners.

Faux Wood Blinds in Shelbyville's older platted additions

Moisture proof slats for Shelbyville baths, kitchens and rentals

Learn more →

Wood Blinds in Shelbyville's older platted additions

Basswood slats matched to Shelbyville's pre-1940 stained trim

Learn more →

Vertical Blinds in Shelbyville's older platted additions

Slider and wide window coverage that stacks clear of the door

Learn more →

Aluminum Mini Blinds in Shelbyville's older platted additions

The shallow stop, low cost option for secondary Shelbyville rooms

Learn more →

Roller Shades in Shelbyville's older platted additions

Flat fabric on a clean tube, with the light gap disclosed

Learn more →

Solar Shades in Shelbyville's older platted additions

Glare control that keeps the view, openness factor explained

Learn more →

Cellular Shades in Shelbyville's older platted additions

Honeycomb cells for a climate with two real seasons

Learn more →

Zebra Shades in Shelbyville's older platted additions

Banded sheer and solid on one tube, alignment explained honestly

Learn more →

Roman Shades in Shelbyville's older platted additions

Soft folds for the West Side's tall, trimmed out openings

Learn more →

Woven Wood Shades in Shelbyville's older platted additions

Bamboo and reed texture, with the variation disclosed first

Learn more →

Blackout Shades in Shelbyville's older platted additions

Darkness engineered at the edges, not just the fabric

Learn more →

Plantation Shutters in Shelbyville's older platted additions

Shutter frames built for openings that have moved a century

Learn more →

Cafe Shutters in Shelbyville's older platted additions

Lower panel privacy that leaves the head detail on show

Learn more →

Motorized Shades in Shelbyville's older platted additions

Motors for the openings you cannot reach, batteries disclosed

Learn more →

Custom Drapery in Shelbyville's older platted additions

Pleated panels sized to tall West Side openings and stair halls

Learn more →

Valances & Top Treatments in Shelbyville's older platted additions

A finished head for plain 1990s and mid century openings

Learn more →

Exterior Solar Shades in Shelbyville's older platted additions

Stop the heat outside the glass, on porches and patios

Learn more →

Retractable Awnings in Shelbyville's older platted additions

Patio cover that folds away for a zone 5A winter

Learn more →

Commercial Window Treatments in Shelbyville's older platted additions

Storefront and office coverage for a 149-building downtown

Learn more →

Skylight Shades in Shelbyville's older platted additions

Overhead shades held flat by channels, charging planned first

Learn more →

Sliding Glass Door Blinds in Shelbyville's older platted additions

Door coverage that parks the stack off the operating panel

Learn more →

Panel Track Blinds in Shelbyville's older platted additions

Wide opening panels with the stack depth stated up front

Learn more →

Sheer Shades in Shelbyville's older platted additions

Floating vanes that soften light without going dark

Learn more →

Pleated Shades in Shelbyville's older platted additions

The lighter, cheaper cousin of a cellular, explained honestly

Learn more →

Bamboo Shades in Shelbyville's older platted additions

Tight bamboo weaves, with the light they pass measured honestly

Learn more →

Dual Shades in Shelbyville's older platted additions

Two fabrics on one bracket, or bands on one tube

Learn more →

Top-Down Bottom-Up Shades in Shelbyville's older platted additions

Light above, cover below, with the extra hardware disclosed

Learn more →

Cordless Blinds in Shelbyville's older platted additions

No operating cord, and honest limits on the lift spring

Learn more →

Hardwood Shutters in Shelbyville's older platted additions

Stained basswood panels, and where wood is the wrong call

Learn more →

Composite Shutters in Shelbyville's older platted additions

Painted composite panels, with the weight and T-post explained

Learn more →

Smart Home Shade Integration in Shelbyville's older platted additions

Protocols, hubs and what happens when a bridge dies

Learn more →

Blind Repair & Restring in Shelbyville's older platted additions

Repair where parts exist, and a straight answer where they don't

Learn more →

Shutter Repair in Shelbyville's older platted additions

Louver tension, hinges and frames, matched where matching is possible

Learn more →

Motorization Retrofit in Shelbyville's older platted additions

Motors added to shades you already own, where they fit

Learn more →

Outdoor Patio Shades in Shelbyville's older platted additions

Patio enclosure that survives wind, anchored into real structure

Learn more →

Office Window Treatments in Shelbyville's older platted additions

Glare, reach ranges and one schedule across a floor

Learn more →

Healthcare Window Treatments in Shelbyville's older platted additions

Cleanable, cordless, with flame documentation in the submittal

Learn more →

Multifamily Window Treatments in Shelbyville's older platted additions

One spec per floor plan, dye lots recorded per phase

Learn more →
Service Area

Serving Homes Across Shelbyville

Shelbyville's older platted additions is one of several Shelbyville communities we serve. We measure and install across Shelbyville, Shelby County, and surrounding areas.

Common Questions

Shelbyville's older platted additions Window Treatment FAQ

Questions we hear most often from Shelbyville's older platted additions homeowners.

No. The same listing taxonomy that returns Beech Brook, Crestmoor, Rolling Ridge and Hazelwood also returns Marietta, Smithland, Prescott, Rays Crossing, Fenns, Walkerville and Marion. Those are rural Shelby County hamlets and townships, not plats inside Shelbyville, and they are deliberately kept out of the list above. It matters practically, because a rural Shelby County farmhouse and a 1960s Wellington Heights ranch are different jobs with different eras, different casings and different counts. If you are not sure which one you own, the first ten minutes of a measure settles it.
Because the windows were almost certainly done in stages. Shelbyville's median year built is 1972 and 35.4 percent of the city's housing went up between 1940 and 1979, and houses of that age very often carry vinyl inserts fitted into the original frames. An insert takes depth at the opening, and if the front of the house was done in one decade and the back in another, the stop at the head will not match. We read every opening rather than measuring one and calling it the house standard. Where the depth is gone, an outside mount on the flat trim is the answer.
It comes down to width. A single shade across a wide picture window in a Rolling Ridge or Hazelwood ranch gets heavy, and all of that weight lands on one clutch and one pair of brackets. Past a certain width we split it into two shades on a shared headrail with a center support bracket, which carries the load and keeps the lift manageable. The trade is a visible line where the two panels meet. We show you exactly where it falls before the order, because that is not something to discover at install.
Enough to matter. These plats run from the 1950s to the 1990s, so the oldest have had 60 to 70 years of settlement and even the newest have had 30. We take a three point measure at every opening: width at the head, the center and the sill, height at both sides and once down the middle. The order goes out at the narrowest width found, and the factory removes 1/16 inch from each side of that. Skip the three points on a Knighthood Village or Beech Brook opening and you get a shade that binds at one end of its travel.
Probably. Arched and transom units in this group appear only in the 1990s sections, while the mid century ranch stock in Crestmoor or Hazelwood runs to fixed picture windows and wide horizontal sliding units instead. The practical answer for an arch is a fixed arched panel above a working lower panel, because no movable product follows a curve and keeps operating. You can also leave the arch bare and treat only the rectangle below it, which costs less and often looks better. Shutters run $175 to $800 per window on national figures, and the arch panel is quoted on top of that.
Yes, and in this price band most people do. A three bedroom ranch in Wellington Heights or Candleglo Village sells around $200,000, and twelve to eighteen openings at national custom pricing of $250 to $2,600 per window is a real decision to stage. The one rule is dye lot. Fabric run six months apart can differ visibly under the same color name, so rooms that have to match get ordered together even if the rest of the house waits. Front rooms first is the usual sequence, then bedrooms, then the back of the house.
Send a Message

Free Assessment in Shelbyville's older platted additions

Schedule a free, no-obligation window covering inspection. We respond promptly to all Shelbyville's older platted additions inquiries.

Service Area
Shelbyville's older platted additions, Shelbyville, IN
Service area

Serving Shelbyville and the surrounding area

Call NowGet Quote